what is the TC flange and TD flange of stainless steel NEMA motor

2022/10/14

Inner pipe ventilated motor

2020/6/1

710-10-450KW 10KV Special inner pipe ventilated motor

Motor Cooling Methods

2020/2/21

Overview of common motor cooling methods:IC01:Self-ventilated with integral fan cooling(DP),Cooling air is blown through the motor by a fan mounted on the shaft.IC11:Self-ventilating with inlet ducts.IC21:self ventilation with air outlet pipeIC31:Self-ven

How do I select the motor cooling method?

2020/2/21

The motor cooling method involving various factors such as cost, installation space and ventilation and heat dissipation effects,and includes the nature of the cooling medium, the arrangement of various cooling circuits and the driving mode of the cooling

6 points for High voltage motor performance guarantee measures

2019/5/25

1. High voltage motor terminal box or junction boxThe junction box consists of main parts such as the box base, the cover and the insulating sleeve. The junction box with rated voltage of 3KV and above, the insulating sleeve is resinized pressing piece or

Can a three phase motor be started when one phase failure?

2019/5/17

When the motor is running with a failure phase, we can analyze it in two case: the stop state and the run state.

How to save energy for IE4 super premium high efficiency motor?

2019/4/29

I. To Reduce Stator Loss II. To Reduce Rotor Loss III.To Reduce Iron consumption IV.To Reduce Stray-load Loss V.To Reduce Wind friction loss

Causes of electric motor winding faults

2019/3/13

Causes of electric motor winding faults 1)Long-term overload,aging of the insulation.

Reasons for Short Circuit Fault of Motor Winding and Inspection Methods

2018/11/22

1. Reasons for Short Circuit Faults of Motor Windings2. Inspection Methods